4 Posts
Hi all! I am a new member to the SME community and I am looking for information on cutting composites on CNC machines. Look specifically for cutter recommendations, toolpath suggestions, HSM, and anything else really related to the milling of composites on 5 axis machining centers.
Any help is much appreciated!!
Thank You
Patrick
Any help is much appreciated!!
Thank You
Patrick
2 Replies
4 Posts
Thank You soo much!
This is going to be a big help to me! I have been machining metal for over a decade and I have now taken a job in composites so this should help me ALOT.
Thank you again
Patrick
This is going to be a big help to me! I have been machining metal for over a decade and I have now taken a job in composites so this should help me ALOT.
Thank you again
Patrick
32 Posts
Hi Patrick,
I saw your post on SME Connect about milling composites on CNC machining centers and thought I might be able to help.
Please see the attached 5 files that discuss machining/milling composites.
If you need anything additional on this subject, or if I can be of further assistance, just let me know.
Best regards,
Carol
Carol Tower
SME e-Librarian
I saw your post on SME Connect about milling composites on CNC machining centers and thought I might be able to help.
Please see the attached 5 files that discuss machining/milling composites.
If you need anything additional on this subject, or if I can be of further assistance, just let me know.
Best regards,
Carol
Carol Tower
SME e-Librarian
Login or Join to Access the Knowledge and Resource Center
SME's Manufacturing Research Assistance is a valuable SME member benefit. Login (via the blue button at the top of the page) to access to specialized research assistance to help with their most pressing research needs, Q&A archives and a comprehensive resource library.
To gain full access to the Q&A and resources, login or click the Join Now button below.
Join Now!
To gain full access to the Q&A and resources, login or click the Join Now button below.