SME Chapter 354 October Plant Tour 637
SME Chapter 354 October Plant Tour
Tour of Ingram Machining Inc.

310 Interlocken Parkway Suite # 150 Broomfield, CO 80021

(303) 464-0500

October 22, 2019 - 5:30 PM

Ingram Machining Inc. has been providing rapid prototype, quick turn and short run manufacturing services for medical, aerospace and other industries since 2002.
 
They specialize in complex parts, instruments and assemblies requiring exact specifications with full documentation of quality control.
They monitor their machining processes and verify each product with a full- service metrology lab. Equipment is calibrated to NIST traceable standards. 

Systems are maintained to satisfy all industry, customer, and regulatory requirements. Thorough, accurate Certificates of Conformance provided.

ISO 9001:2015 and ISO 13485:2016 certified; FDA CFR 820 #3010058084.
Their list of inspection equipment includes:
  • Zeiss Contura G2 CMM with RDS-CAA head (39 x 27in) 
  • Brown & Sharp Gage 2000 CMM
  • OGP Comparator
Ingram Machining goes the extra mile to understand your design needs and priorities. They will work closely with you to customize their approach to meet the specific needs of each project.

Their equipment list includes:
  • 2x DMG 1035 ECO 40in x 20 in travel
  • Brother TCSD-O with 5 axis trunnion
  • Mori SV-403 ( 23 x 16 )
  • Haas VM-2 ( 30 x 20 )
  • Haas Super Mini ( 16 x 12 )
  • Haas Mini ( 16 x 12 )
  • Sharp 2 axis knee mill Doosan Lynx 210 (10x18)
  • Doosan Lynx (6x12)
  • Mori NLX
  • Agie Charmilles Cut 20P
  • .012, .010 and .006 wire, 25 deg taper, 4 axis control
  • 13 x 10 x 10in travel, 35 x 26 x 10in max work piece
After the tour there will be a networking dinner at:
Gordon Biersch Brewery Restaurant
1 W Flatiron Cir
Broomfield, CO 80021
(720) 887-2991

6:30 – 7:30 Networking and Dinner at   Gordon Biersch Brewery Restaurant
7:30 Executive Committee meeting of chapter officers.
There is no cost for the tour.
Cash Bar and Individual Checks for Dinner

For reservations contact Chuck Outapalik, reservations@sme354.org, (303) 678-8414.

Please make separate reservations for the tour and dinner by 10/18.
 
Date & Time
Tuesday October 22nd, 2019 5:30am MDT
End Date & Time
Tuesday October 22nd, 2019 8:00pm MDT
Venue
Ingram Machining, Inc.
Address
310 Interlocken Parkway, Suite #150
Broomfield, CO 80020
United States
First Name
Chuck
Last Name
Otoupalik
Email
reservations@sme354.org
Phone
303-678-8414

Event Map

Date & Time: 10/22/2019 05:30:00 AM MDT